Have you removed the excess hair from the drain but it’s clogged? This doesn’t necessarily mean it’s time to reach out to drain cleaning companies (however, if it’s severe, you should). With a few hacks up your sleeves, you can open the drain on your own. Try these…

Use a Wire Hanger

Take an old wire coat hanger and straighten it up. Bend one of its ends for creating a small hock.  Insert it into the drain and start fishing. This will catch everything that was clogging the drain. Once the filth is out, run the drain with hot water to clear the last bits.

Throw Shampoo

If your toilet bowl is clogged, try using shampoo. Yes, you heard it right. Add a few drops of shampoo into the toilet and pour a bucket of hot water on top of it. Let it sit for 10 minutes.  You will be surprised to see how quickly it unclogs the drain. You might have to repeat this process for better results.

Unclog With Caustic Soda

Before you use caustic soda, make sure you are wearing eye protection and gloves. This chemical can cause burns. Here is what you need to do. Pour ¾ gallon of cold water into a buck bucket. Add 3 cups of caustic soda and stir. You will see bubbles while this happens and that’s okay.

Pour this mixture into the clogged drain. Let it sit for 20 to 30 minutes and flush the drain. Add boiling water on top to be sure the caustic soda is removed from the way.

Salt and Baking Soda

Mix half a cup of salt with half a cup of baking soda. Pour it down the drain. Wait for 10 to 20 minutes and then add boiling water on top. A small chemical reaction will occur that should dissolve all the blockage.

Use Plunger

Get an old fashioned plunger and start plunging. This might only work for minor blockage. To get started, make sure the plunger is submerged completely. Then push to unclog the drain via water pressure.

Pour Boiling Water Down the Drain

This is the easiest trick in the book and it works well if the blockage is small. You can use it for opening kitchen sinks clogged because of grease. Hot water liquefies the fat and makes them spread down the drain further.  This technique is not recommended on porcelain sink bowls and PVC drains.

Baking Soda and Vinegar

Mix baking soda and vinegar in equal proportion. Pour the mixture down the drain and wait for 45 to 60 minutes. Pour water on top to dislodge the blockage.

If you are using this trick to unclog a bathtub drain, place the stopper on the drain once you pour down the baking soda and vinegar mix. Instead of pouring boiling water, fill the bathtub with water and remove the stopper. The water pressure created as a result will unclog the drain in no time.

Use Enzyme Cleaners

Enzyme cleaners can be effective in drain unclogging gas well. However, they take a little more time than usual.  The cleaners use bacteria that feed on the organic matter in the clog and clear the drain.

Get a Cable Auger

If the DIY wire or plunger didn’t work, buy a cable auger from the market. It’s also called drain snake.

Remove the overflow plate from your tub. This will remove the stopper linkage as well. Insert the cable down the tube to about 30 inches. Turn the hand crank and keep pushing forward.  Keep going until the cable passes all the way through the P-trap. Now retrieve the cable. After this, pour hot water down the drain and this shall clear everything.

Use a Dish Detergent

Just like the shampoo, dish detergent can help clear the drain as well. However, it only works if the drain is caused by grease. This means you can also use it in the kitchen sink as well as the toilet.

Mix ¼ cup of detergent with boiling water and pour this mix into the drain. If you are unclogging a toilet, you can also use a plunger to apply pressure when necessary.

These hacks will solve your problem if the drain clog is minor. In case of a major clog, call the drain contractors Manhattan for a proper fix.

Drain pipe inspection with camera is one of the ways of understanding the insides of your drain pipes.

What are the advantages of it?

There are plenty of advantages that come with inspecting the sewer lines using a camera. Some of these advantages include:

It’s accurate: Since you can clearly see the insides of the sewer lines, you can tell where the problem is. If there is a clog, you can tell the size of the clog. If you have a cracked pipe, you can clearly see the location of the crack and its size. This helps you to take the necessary measures that will fix the problem.

It’s cheaper: Decades ago, people had to dig up the yard to access the pipes. Since they didn’t know the exact location of the problem, they had to do it via trial and error. This not only wasted a lot of time, it also led to spending a lot of money.

When it comes to the digging up of the yard, you had to hire a lot of people to do it. As you might expect, this required you to have a large budget.

This is no longer the case when you are inspecting the lines using the camera. Now all you need to do is to hire a single contractor who inserts the camera in the sewer line and identifies all the issues that are there.

While you have to hire the contractor, the amount is way lower than the one you would have spent hiring people to dig up the yard.

You can prevent future problems: Since you are able to identify even the most minor issues, you can protect your sewer lines from developing problems in the future. For example, when you notice a minor sewer clog, you only need to remove it to prevent it from accumulating and becoming problematic in the future.

The same thing applies when you see a crack in your lines. You can decide to seal them if they are minor or replace the entire line if the problems are major.

When is the opportune time to inspect the lines?

You can inspect your sewer lines any time, but there are situations when the lines are problematic and you have to inspect them. Some of these situations include:

When you are experiencing slow drains: When you pour water in your drains, it should drain fast. When the water doesn’t drain fast, chances are high that you are having a clog. You should hire a contractor to determine the exact location of the clog and get rid of it.

When you are having sewer backups: Sewer waste should always go down the sewer pipes. If the waste goes in the opposite direction, there must be something blocking it. The drain contractor you hire should use the camera to identify the material causing the blockage and remove it.

You are having a bad smell: You shouldn’t have any smells coming from the pipes; therefore, if they are there, your pipes might be clacked. By undertaking camera inspection you should identify the location of the crack and repair it. If it’s large, you will have to replace the entire pipe.

Are there camera inspection options?

Yes, there are many options that you can go with. The most popular ones are: lateral launch cameras, push cams, solo robot cameras, and many others.

Each option has its pros and cons. You should have a sitting with your drain cleaning services Bergen professionals and settle on the best ones.

When hiring the professionals, ensure that they are certified and highly experienced in their work.

As a homeowner, you should know that your sewer line is as healthy as things that you put in it. To help you out, here are some of the things that will block your drains as given by sewer and drain cleaning professionals:

Hair

The hair tends to cause clogs in the showers, bathroom sinks, and tub drains. When you shower, you lose hundreds of hair strands. In most cases, the strains are washed away by the water, but on rare occasions, they get stuck along the walls of the drain pipe.

If you don’t regularly clean your drains, the strands buildup blocking the water flow. They also clog the drains. One of the most effective ways of preventing your sewer lines from clogging is to install a hair catcher or sink guard.

Soap

Dead skin cells, grime, dirt, hair strands, and other materials tend to stick to the soapy residue causing a blockage. Soap scum is common in the bathroom sinks and tubs, but it can also occur when washing the dishes. One of the most effective ways of reducing the buildup is to pour two buckets of water and chlorine down the drains at least twice a month.

Grease

You will have a grease buildup in the kitchen sinks. Just as with the soap scum, small food particles and other sediments get trapped in the thick, gooey liquid. It’s easy to get rid of the soap scum but when it comes to the oily residue, it’s difficult to get rid of it.

One of the ways of getting rid of it is to use cold water when running your garbage disposal. Drain contractors report that this aids in removing some of the greases and allows the fat to flow freely through the drainage pipes.

For you to prevent the problem from coming about you should avoid pouring any type of oil down the drain. The best way out is to pour the grease directly into the garbage. You can also have a can that is specifically dedicated to the oil. When it gets full, you should dispose of it.

Conclusion

These are some of the main things that wreak havoc on the sewer lines. For you to maintain sanity with your lines, you should avoid dumping the wrong materials. In the event the lines clog up you should ask a reputable sewer cleaning company to help you with the unclogging.