Tree removal is a risky business, and unless you know what you are doing, avoid taking things into your hands and hire an expert tree cutting service to do it. Here are some common ways people who try to do it themselves mess up.

No Regard to Safety Gear

A lot of people go in to removing the tree on their lawn with no regard to safety. Proper gear is a must for a dangerous task like this.

Using a Chainsaw That Should Be Retired

In order to ensure the safety of you and your helper, the equipment you are using to fell a tree must be in proper order.

Addressing Everything Alone

Just like with every job that involves risk, at least two people are required to watch each other’s back when felling a tree as well. If you go at it alone, you are doing it wrong.

Just Winging It Due to Lack of Knowledge

A lot of people go into removing a tree on their lawn with no prior knowledge about what they are required to do. They believe they can just take care of things as it comes. This is the perfect recipe for disaster.

Leaning the Ladder Against a Tree

A large portion of injuries recorded every year with respect to tree felling are the result of leaning the ladder against the bark.

Not Refueling the Felling Equipment

Most chainsaws today are operated with gasoline, and if the fuel runs out while you are in the middle of tree cutting, it could spell disaster.

Losing Your Grip While Working the Saw

If you lose your grip on the saw while it is operating for even a second, chances are the recoil will make it fly out which is extremely dangerous to you and those around you.

Attempting to Bring Down a Rotten Tree

For any tree that is rotten to the core, you cannot be sure which way it will fall and when. This makes it extremely dangerous to even be near it, let alone attempt to bring it down.

Using a Dull Chainsaw

A chainsaw with dull teeth is not only inefficient at performing its job, there is also an increased risk of damaging the equipment due to excessive force being exerted to cut the tree.

Not Checking the Tension in the Chain Before Starting

If your chainsaw is too loose, it can straightaway fly off the bar, causing serious injury to you and the people around you. It can also permanently damage equipment.

Working Around Live Power Lines or Construction

It goes without saying the hazards involved with working around power lines as well as the risk of property damage if the tree falls on it.

Cutting in the Kickback Zone

Located near the top half of the bar’s tip, the kickback zone must never come into contact with anything while the chain is moving or the saw will recoil towards you.

Pinching the Saw

Once the tree has fallen, you will obviously need to cut it into smaller pieces. But if you don’t do it right, the saw can become pinched and be damaged.

Cutting the Ground

If your chain saw comes into contact with the ground even for a brief moment, it will severely dull the teeth.

Leaving the Stump as Is

Doing this is dangerous for kids and pets who might be running around your lawn.

Ensuring Safe Tree Removal

By now, you are well aware how risky removing a tree by yourself can be. But rest assured, as there is a way to mitigate all of these dangers and ensure safe tree removal with zero risks involved. And what might that be you may ask? Well, the answer is pretty simple: just leave it up to tree removal professionals you can trust.

Those last three words are very important however. Because not all arborist services Chevy Chase are equal, and you only want to hire one that knows what it is doing, otherwise there is no point. Make sure to research well before you sign any contracts. Check out reviews, certifications and talk to past clients before you pull the plug. Also make sure to get quotes in advance, and clarify about any hidden charges.

The trees are much valuable than what you might realize. Trees may also increase the value of the property by as much as twenty percent, depending on the maturity, location, quantity, and species of the trees. Aside from that, trees have the power to minimize your energy bills through offering shade, reduce soil erosion, absorb pollutants in the water and air, clean carbon dioxide, reduce noise pollution, and offer some benefits. There’s no doubt that trees can be a source of great value in terms of improved quality of life and money. This is why you should also prioritize the need of trees for tree removal services.

With that in mind, why would anyone like to cut down her or his trees rather than trying to preserve them? There are numerous instances when tree does need to be cut or removed, normally because it’s located or dead in threatening position. Oftentimes, diseased, damaged, and dying trees can be saved. However, numerous tree service providers present removal as an option when instead it must be considered as the last option.

Which Solution is Ideal for You?

The industry is filled with the companies that can trim and remove trees. Most of the tree service companies, nevertheless, don’t have the expertise with which to determine, treat, and diagnose the tree disorders. As results, trimming and removal are the only solutions they can offer. But, in the industry of tree care, there are other options including tree monitoring, assessment, and evaluation, drought management, lightning protection systems, bracing and cabling, disease management, fertilization, and integrated pest management.

Such services along with some others fall under the tree care category. Tree care professionals know a good deal about tree physiology, root systems, diseases, abiotic factors and pests.

Tree Removal as an Option

Tree removal is a much costly option. Depending on the kind and size of the tree, the average cost for removing a big tree might run over to a thousand dollars. When compared to typical tree care solutions, these are affordable. Applying pest controls, excavating root collars, fertilization, and treating trees for disease are all the services that range from fifty dollars to two hundred dollars per tree, yet it depends on the work’s exact scope.

To save some money, improve the value of your property and boost your quality life with various tree care and tree removal services chevy chase md solutions available in the market today.

If you have many large oak trees, they might drop a lot of acorns to the extent that you feel like hiring a tree removal company to get rid of the trees. Before you decide to remove the tree, you should try controlling the acorns on your yard.

One of the main reasons why many homeowners want to get rid of the trees is because the acorns destroy their yards. For you to keep your yard clean, you should come up with measures to pick the acorns as soon as they drop.

Tips on how to pick the acorns

There are plenty of ways in which you can pick the acorns. Some of these ways include:

Lawn sweeper: If you already have a lawn mower, a lawn sweeper will greatly help you in getting rid of acorns from your yard. All you need to do is to attach the sweeper to your lawnmower and it will follow the mower from behind.

The sweeper will collect twigs, acorns, leaves, and any other materials that might come across. When you are buying the sweepers, there are plenty of them in the market that you can go for. There are those that use a suction device and others that rely on the scooping action to complete the task.

Leaf vacuum: Also known as a lawn vacuum, the leaf vacuum is used in collecting leaves, but you can also use it to vacuum up the acorns. The machine is powered by a small motor and after sucking up the debris, it directs it to the attached bag.

When you are buying or renting the machine, you should ensure that the motor is powerful enough to retrieve the acorns.

Rake: Raking the acorns is highly effective, but it’s often ignored by many people as its slow, especially if you have many oak trees that are dropping plenty of acorns.

You should use raking when you have just a few trees. After gathering the acorns into a pile, you should then scoop them using your hands or shovel.

Tarps: If you don’t want to go through the trouble of collecting the acorns after they have fallen off the trees, you should simply place a tarp beneath the base of the trees. After the acorns have fallen on the tarp, your next move should be to fold and empty the tarp.

You can rake the acorns into piles and dispose them in a green waste or compost bin.

Nut gatherer: This is a manual device that is made up of a long pole and cage that rolls along the surface of the lawn. When you pass the weasel over the acorns, the acorns are collected inside the basket. You should empty the basket as soon as it gets full.

How to control the annoying oak tree

You might be having too many trees or the trees might be producing a lot of acorns than you can handle. In such a case, you have to control the acorn production.

One of the ways of doing it is to use chemicals. There are plenty of chemicals in the market that you can use to reduce the number of acorns produced. The chemicals work in different ways, but in most cases, they stop the maturation of the fruits.

If you have tried to control the production of acorns and still the trees are still going on with acorn production, you have no way out but to hire a tree services MD professional to remove the tree.

When hiring the professional, ensure that he/she is certified and experienced enough to safely remove the tree without damaging the surrounding buildings.

While the trees provide shade and provide your home with character, if you don’t want to deal with acorns, you should avoid planting them in your yard.